Bosch Solution 2000 ( 4 Zone ) Alarm panel with tamper switch
3 x Bosch Blue line Hardwired movement detectors (PIRs)
1 x External “Classic” style or “Slimline” siren with blue strobe
1x Internal siren (piezo)
Power pack & backup battery
1 x Bosch Icon LCD Keypad
Cables & connectors
24 Months WARRANTY on all parts

HOW IT WORKS:

System Components & Setup

📦 Control Panel
The Bosch Solution 2000 control panel is the heart of the system. It monitors up to 4 wired zones (expandable to 8) and includes tamper detection. Inside the panel is a backup battery and power supply, ensuring the alarm keeps operating even during a power outage.

🔐 Sensors & Zones
Each zone is connected to a Bosch Blue Line PIR motion sensor. These are typically installed in key areas like entry points, hallways, or living spaces. If motion is detected in any of these zones while the system is armed, it triggers an alarm.

📱 Keypad (LCD Icon)
The included LCD icon keypad is how you control the system. You use it to arm, disarm, check system status, and configure basic features. The display uses simple icons to show which zones are active, if there are any faults, and which mode is currently selected.

📣 Sirens
The system includes an internal siren that sounds inside the home and an external siren with a blue strobe light to alert neighbours and deter intruders.

Arming Modes & Operation

• Away Arm: When everyone leaves the property, you arm the system fully. All zones are monitored.

• Stay Arm: When you are home but still want protection, you can arm only certain perimeter zones  (you can choose which ones you want armed when the technician installs)

• You can arm and disarm the system via the keypad or, if the optional Ethernet module is installed, via the Bosch smartphone app.

Example of How It Works Day-to-Day

1. Install sensors in key locations and connect them to the control panel.

2. When leaving home, arm the system in Away mode.

3. If someone enters a monitored area, the sensor triggers the alarm.

4. Sirens sound, and if connected, the app or monitoring service is notified.

5. When you return, disarm the system with your user code.

6. Use the keypad to review which zone was triggered and address any faults.