Jun 10, 2020 seriousadministration No Comments

What you need:

  • the camera/s
  • The NVR
  • Precrimped CAT5/6 Cables or an installer who supplies the CAT6 cables (with RJ45 ends). (1 per camera and 1 from the NVR to the modem)
  • A monitor or TV (with VGA or HDMI connections)

Cabling requirements:

  • Run the CAT5/6 cables to the locations you require (1 per camera). The cables should come back to the location where your NVR is located
  • Connect & install the cameras to one end of the cable and connect the other end to the NVR
  • Plug in the monitor via a VGA or HDMI cable to the NVR
  • Connect an ethernet cable from the NVR to the modem (if you wish to do remote viewing).